×
Alumina ceramic disc
Alumina ceramic disc
Alumina ceramic disc
Alumina ceramic disc
Alumina ceramic disc
قرص سيراميك الألومينا

1. مادة: 95-98%, ال2ا3

2. Colour: White, Ivory, Pink, Dark.

تخصيص: من عند: 11.5mm---32mm

تفاصيل المنتج ملاحظاتك الآن

يعد قرص سيراميك الألومينا حلاً جيدًا لمشاكل التآكل العالي وتآكل المحتوى الصلب العالي في عملية إنتاج الصودا, خاصة في الماء المالح وعملية التقطير, قلب الصمام الخزفي دمر أي نوع من مواد سبائك مقاومة للتآكل والتآكل في قلب الصمام, so that the ceramic valve plate has become the most ideal valve core material so far.

Static and dynamic, static is equipped with four hole on, they are cold, hot water inlet and outlet, respectively, on a chip of the adjacent two section two layers inside and outside ring belt, as a group, and the other two are also two layers inside and outside ring belt, become another group, two groups of hole with a diameter of symmetry, move on, there are two symmetrical concave cavity in diameter,Each cavity on the moving piece can cover the two through holes corresponding to it on the connected fixed piece. When the moving piece rotates along the axis of the fixed piece on the fixed piece, each cavity on the moving piece can connect or close the two through holes corresponding to it at the same time to realize the double switch and throttling of cold and hot water.

Note: the ceramic disc spool is used in the water mouth, there is a moving disc and a static disc in the valve, the ceramic disc spool is wider than the ceramic disc spool, you can try the ceramic disc seal, can also be a ceramic

غرض المنتج size موك(set)
1 13.5ceramic disc
our basic size
13.5مم 50000
2 14.5ceramic disc
Our basic size
14.5مم 50000
3 15.0ceramic disc
Our basic size
15.0مم 50000
4 15.5ceramic disc
Our basic size
15.5مم 50000
5 15.7ceramic disc
Our basic size
15.7مم 50000
6 16.1ceramic disc
Our basic size
16.1مم 50000
7 21.0ceramic disc
Our basic disc
21.0مم 50000

1. The frictional times is 300, 000 ل 500, 000,
2. Density :3.6~3.7g/cubic centimeter,
3. Rigidity is 84~86 HRA,
4. The thickness tolerance is less than 0.02mm, the diameter tolerance is less than 0.02mm,
5. Satisfy various technical request
6. Lower medium spoilage
6. Good insulation performance and high temperature resistance
7. Stiffness texture
8. Used in all electric products and electric heating products
9. تصنيع المعدات الأصلية, ODM and OBM are welcomed
We can supply the products according to customer's drawings, العينات ومتطلبات الأداء.

س1: هل أنت شركة تجارية أو مصنع ?
أ: نحن مصنع.
Q2: هل تقدمون عينات?
أ: نعم, عينات مجانية.
س3. هل يمكن أن تنتج وفقا للعينات? ?
أ: نعم, يمكننا إنتاج العينات أو الرسومات الفنية الخاصة بك. يمكننا بناء القوالب
س 4. هل تختبر جميع البضائع الخاصة بك قبل التسليم?
أ: نعم, نحن لدينا 100% اختبار قبل التسليم لمدة 3 مرات.
س5. خدمة ما بعد البيع
أ: إذا وجدت أي منتجات مكسورة بكميات كبيرة, سننتج مرة أخرى أو نعوض المال مباشرة ونقدم خصمًا بالترتيب التالي.
يمكننا توقيع اتفاقية الجودة عند تأكيد الطلب. لذلك يجب أن نتأكد من الجودة لك.

Alumina Ceramic Disc, Ceramic Disc, بوتقة كربيد السيليكون

أرسل رسالتك إلينا:
الاستفسار الآن
الاستفسار الآن